8BitChip Forum

Atari => Hardware => Topic started by: Petari on 05-01-2013, 10:31:36

Title: Project - advanced internal IDE adapter with opt. TOS upgrade, switch
Post by: Petari on 05-01-2013, 10:31:36
Features:  reliable work with new Compact Flash cards
                   very fast - up to 3MB/sec reading possible - fastest seen on ST(E)

TOS 1.04 - 2.06 for ST machines. 2.06/1.62 switchable for STE.

Socket (connector) mounted in machine case , accessible from outside.

Cost of adapter self:  estimated price is around 40 Euros.

Comparing it with UltraSatan and other solutions:

Not just connect to machine and use type.

Much faster. Not only mass storage - TOS upgrade too. High speed offers some new things.
While other solutions go on usual hard disk drivers like Hddriver, this will work with own, special
driver.

  Because this needs some solderings, cuttings in machines, I plan for beginning to not sell
kits. Who is interested need to post me machine for upgrade. It costs of course, but beside
adding adapter in machine, I will do some fixes by need. Here thinking on weakened electrolyth
capacitors in machines in first place - what is now, when they are over 20 years old very common problem.

Recommended to who : 
People wanting to use old, good SW in more advanced/comfortable way than from floppies.
Most of SW can run from hard disk - there is already a lot adapted.
Those who like new solutions, speed.
For people wanting TOS upgrade, old ST(E) machines, needing little fixing.

I think that this is more useful than some accelerator, over 4MB RAM upgrade - because
their SW compatibility is pretty limited.

Let me know if you are interested.

Title: Re: Project - advanced internal IDE adapter with opt. TOS upgrade, switch
Post by: Anemos on 06-01-2013, 13:06:51
Yep,interested here :)
Title: Re: Project - advanced internal IDE adapter with opt. TOS upgrade, switch
Post by: kovacm on 08-01-2013, 09:16:52
me too :)
Title: Re: Project - advanced internal IDE adapter with opt. TOS upgrade, switch
Post by: sender on 10-01-2013, 14:13:25
Im interested in 2 but what is the rough cost of fitting post etc on top of the 40 Euro for the board and would we need to send a CF card and the full machine or just the mobo   ??
Title: Re: Project - advanced internal IDE adapter with opt. TOS upgrade, switch
Post by: sender on 11-01-2013, 15:09:30
Will this also work if you have the cata device ??
Title: Re: Project - advanced internal IDE adapter with opt. TOS upgrade, switch
Post by: Petari on 12-01-2013, 11:06:00
I need to see about concrete shippings costs - and it depends much of country where you reside. Certainly is more for UK than for Slovakia (I'm in Hungary).

Sending mobo is OK in principle. But you need then to mount socket for card by self. Why sending CF card ? Of course, it is not problem, and I can add some stuff on it, testing is enough fast for certain things ...

It should work with CATA - I'm not so far with producing it, but there are no address conflicts. But why 2 devices with same purpose ?
Title: Re: Project - advanced internal IDE adapter with opt. TOS upgrade, switch
Post by: Petari on 15-01-2013, 14:42:56
WEB page with little more details:

http://atari.8bitchip.info/advide.php